Miniincarcatoare pe roti
Pret la cerere
Gallery 232D3
Gallery 232D3
232D3

Miniincarcatorul pe roti Cat® 232D3 dispune de un sistem cu ridicare verticala, care asigura inaltime si capacitati de ridicare superioare pentru incarcarea rapida si usoara a camioanelor. Stabilitatea si performantele sale de ridicare asigura o manipulare excelenta a materialelor.

Specificatii tehnice
Descriere
+ -
Engine
Gross Power - SAE J1995 50.1 kW
Net Power - SAE 1349 49.1 kW
Displacement 2.2 l
Stroke 100 mm
Bore 84 mm
Peak Torque - 1,500 rpm - SAE J1995 208 N·m
Net Flywheel Power 49.1 kW
Net Power - ISO 9249 49.6 kW
Engine Model Cat C2.2 CRDI
Operating Specifications
Rated Operating Capacity 865 kg
Tipping Load 1725 kg
Breakout Force - Tilt Cylinder 1782 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA...
Rated Operating Capacity with Optional Counterweight 910 kg
Weights
Operating Weight 2955 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA...
Dimensions
Wheel Base 1054 mm
Height - Top of Cab 2029 mm
Vehicle Width over Tires 1497 mm
Ground Clearance 170 mm
Departure Angle 27.9°
Maximum Dump Angle 47.4°
Length - Without Bucket 2523 mm
Clearance at Maximum Lift and Dump 2254 mm
Bucket Pin Reach - Maximum Lift 224 mm
Maximum Overall Height 3832 mm
Turning Radius from Center - Machine Rear 1513 mm
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA...
Bucket Pin Height - Carry Position 214 mm
Length - With Bucket on Ground 3233 mm
Bumper Overhang - Behind Rear Axle 894 mm
Turning Radius from Center - Bucket 1976 mm
Maximum Reach - With Arms Parallel to Ground 1249 mm
Bucket Pin Height - Maximum Lift 3001 mm
Reach - Maximum Lift/Dump 653 mm
Rack Back Angle - Maximum Height 88.2°
Turning Radius from Center - Coupler 1102 mm
Hydraulic System
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow 99 l/min
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 26.5 kW
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure 23000 kPa
Hydraulic Flow - Standard - Loader Hydraulic Flow 69 l/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure 23000 kPa
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 38 kW
Cab
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
Power Train
Travel Speed - Forward or Reverse - One Speed 12.3 km/h
Travel Speed - Forward or Reverse - Two Speed Option 17.8 km/h
Service Refill Capacities
Cooling System 12 l
Engine Crankcase 10 l
Fuel Tank 57 l
Hydraulic System 45 l
Hydraulic Tank 34 l
Chain Box - Each Side 7 l
Noise Level
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab* 83 dB(A)
Outside Cab** 101 dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling...
Air Conditioning System (if equipped)
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.