Camioane rigide de talie mare
Pret la cerere
The 785 Large Mining Truck was Caterpillar’s first entry into the mining industry more than three decades ago and has been a proven performer on sites around the world ever since. And now it’s the first to combine a game-changing level of efficiency with industry-leading physical availability to deliver the next generation of productive hauling. It all starts with the operator, who sits in a state-of-the-art environment designed for efficiency and equipped with features that increase comfort, automate functions, provide real-time information and boost confidence. The 785 also delivers significant improvements in serviceability and reliability, enhanced connectivity and easier technology integration. These improvements — and more — take an already proven truck to the next level of productivity.
Descriere
+
-
Engine
| Gross Power - SAE J1995 | 1193 kW |
| Net Power - SAE J1349 | 1125 kW |
| Engine Model | Cat® 3512E |
| Emissions Rating | Fuel Optimized |
| Bore | 170 mm |
| Stroke | 215 mm |
| Displacement | 58.56 l |
| Note (1) | Net Power advertised is the power available at the flywheel when the engine is equipped with air intake system, exhaust system, and alternator. |
| Note (2) | U.S. EPA Tier 4 Final / EU Stage V available for applicable markets. |
| Note (3) | Additional fuel optimized selectable power ratings: 1,450 hp |
Weights - Approximate
| Nominal Rated Payload (33.00R51 Tires) | 139 t |
| Rated Gross Machine Weight (33.00R51 tires) | 249476 kg |
| Nominal Rated Payload (36.00R51 Tires) | 142 t |
| Rated Gross Machine Weight (36.00R51 tires) | 255826 kg |
| Chassis Weight (33.00R51 Tires) | 84731 kg |
| Chassis Weight (36.00R51 Tires) | 87631 kg |
| Body Weight | 26208 kg |
| Note (1) | Consult your tire manufacturer for maximum tire load |
| Note (2) | |
| Note (3) | Body weight varies depending on body selection and configuration. |
Weight Distributions - Approximate
| Front Axle - Empty | 48% |
| Rear Axle - Empty | 52% |
| Front Axle - Loaded | 33% |
| Rear Axle - Loaded | 67% |
| Note | Weight distributions optimized with Cat body. |
Final Drives
| Type | Double reduction, planetary with full floating axles. |
| Differential Ratio | 2:10:1 |
| Planetary Ratio | 10.83:1 |
| Total Reduction Ratio | 22.75:1 |
Transmission
| Forward - 1 | 12.1 km/h |
| Forward - 2 | 16.3 km/h |
| Forward - 3 | 22.2 km/h |
| Forward - 4 | 29.9 km/h |
| Forward - 5 | 40.6 km/h |
| Forward - 6 | 54.8 km/h |
| Reverse | 11 km/h |
| Top Speed - Loaded | 54.8 km/h |
| Note | Maximum travel speeds with standard 33.00-R51 tires. |
Tires
| Standard Tire | 33.00R51 |
| Optional Tire | 36.00R51 |
| Rims | 610 mm (24") Rims (standard). 660 mm (26") Rims (optional). |
| Note (1) | Quick Change Rims optional. |
| Note (2) | Caterpillar recommends the customer evaluate all job conditions and consult tire manufacturer for proper tire selection and TKPH (TMPH) capabilities. |
Braking System
| Service Brakes | Four-Corner, Wet Disc, Oil Cooled, Hydraulically Actuated |
| Front Wet Disc Brake Surface Area | 61270 cm² |
| Rear - Wet Disc Brake Surface Area | 89728 cm² |
| Standards | Service and Secondary: ISO 3450:2011 |
| Parking Brake | Four corner, multi disc, spring applied, hydraulically released |
Capacity - MSD II - 100% Fill Factor
| Struck | 72 m^3 / 94 yd^3 |
| Heaped (SAE 2:1) | 99 m^3 / 129 yd^3 |
| Note | Consult your local Cat dealer for body recommendations. |
Body Hoists
| Type | Twin, two-stage hydraulic cylinders with snubbing valve. |
| Pump Flow - High Idle | 729.6 l/min |
| Relief Valve Setting - Raise | 17238 kPa |
| Body Raise Time - High Idle | 15.2 s |
| Body Lower Time - Float High Idle | 15.9 s |
| Body Lower Time - Float Low Idle | 16.2 s |
| Body Power Down- High Idle | 15.9 s |
Suspension
| Type | |
| Effective Cylinder Stroke - Front | 320 mm |
| Effective Cylinder Stroke - Rear | 165 mm |
| Rear axle - Oscillation | +/- 5 degrees |
Service Refill Capacities
| Fuel Tank | 1552 l |
| Diesel Exhaust Fluid Tank | 136 l |
| Cooling System | 379 l |
| Crankcase | 204 l |
| Front Wheels - Each | 30 l |
| Differential - Final Drives | 527 l |
| Steering Tank | 110 l |
| Steering System - Includes Tank | 170 l |
| Brake/Hoist Tank | 511 l |
| Brake Hoist System - Includes Tank | 606 l |
| Torque Converter - Transmission System - Including Sump | 175 l |
Cab
| Air Conditioning | HFC - 134A refrigerant: 24,500 Btu/h |
| Heater / Defroster | 33300 Btu/h |
| Note | The operator sound pressure level, 77 dB(A) with direct drive and 75 dB9A) with optional clutch, tested to ISO 6396:2008. |
| ROPS Standards (1) | ROPS (Rollover Protective Structure) meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer. |
| FOPS Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 for Operator and ISO 13459:2012 Level II for Trainer. |
Steering
| Steer Angle | 36 ° |
| Turning Diameter - ISO 7457:1997 (33.00R51 tires) | 29.8 m |
| Steering Standards | ISO 5010:2007 |
Dimensions (All dimensions are approximate. MSD II Body, 33R51 tires, unloaded machine.)
| Height - Top of ROPS | 5208 mm |
| Overall Body Length | 11985 mm |
| Inside Body Length | 8318 mm |
| Overall Length | 11957 mm |
| Wheel Base | 5180 mm |
| Rear Axle - Tail | 3829 mm |
| Ground Clearance | 1004 mm |
| Dump Clearance | 1128 mm |
| Loading Height - Empty | 5299 mm |
| Inside Body Depth - Maximum | 2790 mm |
| Overall Height - Body Raised | 12032 mm |
| Operating Width | 7535 mm |
| Centerline Front Tire Width | 4850 mm |
| Engine Guard Clearance | 1038 mm |
| Overall Canopy Width | 7562 mm |
| Outside Body Width | 6714 mm |
| Inside Body Width | 6010 mm |
| Front Canopy Height | 6035 mm |
| Rear Axle - Clearance | 990 mm |
| Centerline of Rear Dual Tire Width | 4285 mm |
| Overall Tire Width | 6277 mm |